PE Foam Bonding Machine is also called PE Foam Thickening Machine. This machine is heat one single side of PE foam sheet to nearly melting point via LPG flame. Then laminate 2 pieces together. The lamination is by 2 rollers. No agent or glue is needed. Maximum laminate thickness may reach 100 mm. It is a must have equipment of PE foam deep process. 

Electrical PE Foam Bonding Machine is also available at request. The heating stove station is with 9 heaters + a blower. Therefore it reserves the freedom for you to convert back to open fire type. 
Standard configuration:
1. Unwinding unit: 2 unwinders: with unwinding roller, guiding limit rod and a frame.
2. Main lamination unit: main frame, smooth pull roller 2 pieces, adjustment devices, fire stove, cylinder, gearbox, pull motor, rubber roller, guiding roller, air adjustment devices and fire tube.
3. Rewinding unit: frame, winding roller and torque motor.
4. Electrical section: pull, rewinding, control devices, speed regulation, torque regulator (For export, we usually use Taiwan DELTA and this is why it is more expensive than domestic design)
Technical parameter